Cloudy Water 

Note:

---

PROBLEM: Unable to see the bottom of the pool. Water lacks sparkle, appears dull and flat.
SOLUTION: Most cloudy water problems are related to poor filtration. Operate filter at least 24 hours per day continuously until water clears.

---

PROBLEM: Weak flow from return inlets, poor-to-no surface activity, frequent backwash cycles, inadequate filtration due to dirty filter media (sand, D.E., cartridge)
SOLUTION: Filter should be cleaned twice each season to remove dirt and oil build up.

---

PROBLEM: High pH (over 7.6) and high level of total alkalinity (over 200 ppm).
SOLUTION: Ideally adjust pH to 7.4 to 7.6 with PH Decreaser. (A range of 7.2 to 7.6 is acceptable.) See A.C. Swimming Pools to reduce total alkalinity.

---

PROBLEM: Build-up of organic contamination that causes dull-looking water.
SOLUTION: Oxidize contaminents with Calcium Hypochlorite or Lithium Hypochlorite. Follow label directions.

---

PROBLEM: Sanitizer (chlorine) level is below 1.0 ppm.
SOLUTION: Add (Trichloro) 1" or 3" Chlorine Tabs, Sticks, or Granular Di-Clor.

---

PROBLEM: Difficulty in maintainng 1.0 - 3.0 ppm free chlorine residual.
SOLUTION: Increase amount of (Trichloro) 1" or 3" Tabs, Sticks, or Granular Di-Clor. Increase flow rate through your chlorinator and/or circulation time on pump.

---

PROBLEM: Early stages of algae infestation, slick or slimy walls, black spots on walls or floor, mustard-colored dust in areas of poor circulation.
SOLUTION: Refer to the Algae Troubleshotting section of this website.

---

PROBLEM: High levels of calcium hardness and total dissolved solids.
SOLUTION: Take a sample of pool water to A.C. Swimming Pools. Follow recommendations.